PoE IP Encoder : PIE-1

PoE IP Encoder : PIE-1
  • PIE-1

PIE-1 is an encoder that converts analog relay outputs to original ASCII code (Redwall Event Code) for Redwall and Fiber SenSys detectors. Detectors can be connected to Video Management Software platforms with PIE-1 and control IP cameras.

PIE-1 is generating Redwall Event Code using the analog alarm inputs from the Redwall and Fiber SenSys detectors. Video Management Software receives the event code and sends a command to reposition to a pre-set and/or start recording with a camera.

PIE-1 is compatible with Power over Ethernet (PoE). IEEE802.3 af/at making it possible to supply power using a PoE hub or switch. Only one LAN cable is needed to connect PIE-1 to a PoE hub or switch reducing your installation time and cost.

Not to be sold separately.
For REDWALL-V (SIP) series and REDSCAN (RSL) series (power supply only)

Features

  • Change Analog to IP
    PIE-1 changes analog relay output signals (N.C.) to original ASCII code.
  • Compatible with Power over Ethernet
    PIE-1 can supply power to detector using a PoE hub or switch.

Control IP camera Via Video Management Software

For the following item(s)

Synthesized Intelligent PIR : SIP-3020/4010/404 series

Synthesized Intelligent PIR : SIP-3020/4010/404 series

Detectors in the REDWALL-V Series are ideal for triggering outdoor camera systems where high performance is required.
RLS-3060 Series

RLS-3060 Series

It can detect a moving object's size, speed, and distance from the detector and process that information with a unique algorithm, which results in hi-reliability detection of people with minimal false alarms.

Please go to the support page to get the SDK file.

  • Specifications

  • Dimensions

Model

PIE-1

Power supply

PoE (IEEE802.3af/at compliant)

Power output

24 VDC 800 mA max, 12 VDC 50 mA max

Signal input

5 input for dry contacts (N.C. only)

Place of use

Outdoor (Inside of the waterproof case)

Alarm output

Redwall Event Code (UDP / TCP)

Operating temperature

-40 to +60℃ (-40 to +140 ℉)

Operating humidity

95%RH. max

Operation LED (Normal)

Green light is ON when the power is supplied by PoE

Operation LED (When communicating)

Yellow light blinks during communication

Switch

Ethernet converter / LAN through

Function setting

Use web browser

Use web browser

67.5 mm x 94.7 mm x 33 mm (3.66” x 3.73” x 1.30”)

Weight

270 g (8.8 oz: including all parts) Main unit: 90 g (3.2 oz)

Supported protocols

IPv4, ARP, UDP, TCP, ICMP, HTTP

Accessories

Power output cable x2, Alarm input cable x3, Installation instruction, Mounting plate for a Double Gang Box,
Gasket sheet for Gang Box, Mounting Screws x6
Dimensions

unit（mm）

Contact phone number

Headquarters
+81-77-579-8004

Contact form

Click here for contact form

Support information

Support