Turbidity Sensor (Middle Range) TSC-D Series

High cost performance model with separate transmitter and detector.

Products Name
TSC-10-D,[Parts No. A10005337]
  1. Features
  2. Specifications/Dimensions

Features

90 degree scattered light method
Turbidity Sensor TSC-10S(E) uses a method of 90 degree scattered light as the measuring principle of the world common standard.
               Built-in wiper cleaning system
               The built-in wiper cleaning system certainly keeps lenses clean.
Built-in wiper cleaning system
Sapphire glass of the optical windows
The optical windows are made of hard-to-scratch sapphire glass. It enables to scrub the window surface to maintain the Turbidity Sensor.
Sapphire glass of the optical windows
               Compact design
               The compact design makes it possible to install easily.
Compact design

Application

Measurement of the effluent

Measuring the turbidity of the effluent from the waste water treatment plant makes it possible to monitor the treatment condition.

Measurement of the effluent

Measurement of the intake water

Measuring of the intake water for drinking water manufacturing process makes it possible to prevent any troubles that may be caused by sudden turbidity change.

Measurement of the intake water

Installation

Installation example

Diagram of an example installation of a turbidity meter.(Middle Range Type)

Extension of sensor cable

The standard length of the sensor cable is 9 m. To extend the cable, refer to the following.
To extend the cable, connection using pull box is recommended.

Sensor cable extension diagram for turbidity meter.
The cable gland fits the cable sheath diameter of 6 to 8 mm.

Transmitter

Universal Transmitter SC Series

Universal Transmitter SC Series

New transmitter which provide excellent usability and operability. Our sensors can be connected multiply.

Display item

Set the unit of turbidity to show on the SC-U1 display.

image of the SC-U1(E) display screen

Options

Mounting attachment: TA-3

Mounting attachment: TA-3

[Parts No. 05075]

By mounting the turbidity sensor and SS sensor to the pipe, it prevents hitting the wall or facility equipment and rotating it.　Please use it when the water current is fast.

Applicable pipe: Stainless steel pipe for piping 25 A (OD 34 mm)
Material: S30400
*Please prepare the pipe for installation by customer

Maintenance kit: TSC-MK

Maintenance kit: TSC-MK

[Parts No. 05076]

It is a replacement blade of the wiper cleaning device. Please exchange once a year as a guide.

Component
●Wiper blade × 2
●Cleaning brush × 1
●Detection window Cleaning paper × 2
●Manual × 1

Please go to the support page to get the necessary files in PDF.

  • Specifications

  • Dimensions

Model TSC-10-D
Measurement range 0.00 – 1000.0 NTU (formazin standard solution)
Display resolution 0.00 – 19.99 NTU: 0.01 NTU
20.0 – 1000.0 NTU: 0.1 NTU
Power supply voltage 24 VDC ± 10%
Current consumption Standard: 30 mA max.
Cleaning: 230 mA max.
Communications (function) MODBUS (RTU/ASCII)
Cleaning system Wiper cleaning system
Operating temperature 0 to 40°C (unfrozen)
Major material SUS316L, Sapphire glass, Fluorocarbon rubber, EPDM, PVC (cable)
Dimensions Approx. Φ48 × 133 mm
Weight Approx. 1.1 kg
Degree of protection IP68, maximum depth of 2 meters (underwater type)
Sensor cable length 9 m
*Specifications are subject to change without prior notice.
TSC-10-D Dimensions

Solutions

Abnormalities in Factory Wastewater: Ignoring Them Is Not an Option

Abnormalities in Factory Wastewater: Ignoring Them Is Not an Option

  • Cost-reduction
  • Automation
  • Operational-efficiency
  • Facility-monitoring
  • IoT
  • Water-conservation

Contact phone number

Headquarters
+81-77-579-8680

Contact form

Click here for contact form

Support information

Support