Wide Angle Outdoor PIR Detector : VX SHIELD Series

Wired Model
VXS-AM [Active IR anti-masking model]
VXS-DAM [with Dual technology]
Battery Operated Model
VXS-RAM [Battery operated with active IR anti-masking]
VXS-RDAM [with Dual technology]

Color Variations

  • White
  • Black

Features

  • Active IR anti-masking for detecting covering objects
  • 12 m (40 ft.) by 90 degree flexible detection pattern adjustable to 5 ranges
  • SMDA logic for advanced temperature compensation and environmental noise immunity
  • Easy masking for over spill prevention
  • Double conductive shielding against bright light disturbance
  • Back tamper
  • Walk test interval
  • Option : Face cover (Silver / black)

Color variations

Digital triple layer detection


Both the upper / lower PIR detection areas and MW detection area must simultaneously be crossed to generate an alarm. Each activation is independently analyzed so that spurious events can be filtered and ignored. This technology virtually eliminates nuisance detection of smaller animals in the premises.

Anti-masking


Active IR Anti-masking detects covering objects on lens surface when monitoring of the detector status is required.

SMDA (Super Multidimensional Analysis) logic


All VXS models are equipped with a digitally enhanced signal recognition logic called SMDA. By analyzing detection patterns and environmental information SMDA improves immunity against various noise factors such as climate changes and vegetation sways, and can distinguish between the cause of nuisance false alarms and genuine intrusions.

Automatic walk test mode


Walk test modes starts when closing the cover. Walk test mode expires 3 minutes and return to Normal mode.

Double conductive shielding


By using our double conductive shielding, the visible light disturbance and RFI can be blocked.

Blue touch

Level indicator


Easy to recognize the sensor is installed even with the ground.

Multipurpose back box (VXS-RAM / VXS-DRAM only)

Back tamper


Trouble output activates when back box as well as chassis is removed.

Versatile design

Application Examples

Residence
Residence
Shopping malls
Shopping malls
Office buildings
Office buildings

Options

Selectable Plug-In End Of Line Unit : PEU

Selectable Plug-In End Of Line Unit : PEU

For WXS, WXI, VXS, VXI, BXS, CDX, FMX
Back Box for VXS

Back Box for VXS

For VXS-AM/RAM/DAM/RDAM
Face Cover for VXS

Face Cover for VXS

For VXS-AM/RAM/DAM/RDAM
Cover Unit for VXS

Cover Unit for VXS

For VXS-AM/RAM/DAM/RDAM
Battery Box : RBB-01

Battery Box : RBB-01

For VXI-R/RAM/RDAM, VXS-RAM/RDAM

Please go to the support page to get the necessary files in PDF and/or DXF.

  • Coverage

  • Specifications

  • Dimensions

VXS-AM/RAM

Coverage

VXS-DAM/RDAM

Coverage
Coverage

Unit（m）

Model VXS-AM VXS-DAM VXS-RAM VXS-RDAM
Detection method Passive infrared Passive infrared & Microwave Passive infrared Passive infrared & Microwave
Coverage 12 m (40 ft) 90° wide / 16 zones
PIR distance limit 12 - 2.5 m (5 levels)
Detectable speed 0.3 to 2.0 m/s (1.0 to 6.7 ft./s)
Sensitivity 2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
Power input 9.5 – 18 VDC 3 – 9 VDC (Lithium or Alkaline Battery)
Current draw 24 mA max. at 12 VDC 35 mA max. at 12 VDC 10 μA standby /4 mA max. at 3 VDC 18 μA standby /8 mA max. at 3 VDC
Alarm period 2.0 ±1 sec.
Warm-up period Approx. 60 sec. (LED blinks)
Alarm output N.C. / N.O. Selectable 28 VDC 0.1 A max. N.C. / N.O. Selectable-Solid State Switch 10 VDC 0.01 A max.
Trouble output N.C. 28 VDC 0.1 A max. N.C. / N.O. Selectable-Solid State Switch 10 VDC 0.01 A max.
Tamper output N.C. 28 VDC 0.1 A max, open when cover removed
LED indicator Red LED : 1. Warm-up 2. Alarm 3. Masking detection (DIP switch ON or Walk test) Red LED : 1. Warm-up 2. Alarm 3. Masking detection
+
Yellow LED : 1. Warm-up 2. MW detection
(DIP switch ON or Walk test)		 Red LED : 1. Warm-up 2. Alarm 3. Masking detection (DIP switch ON or Walk test) Red LED : 1. Warm-up 2. Alarm 3. Masking detection
+
Yellow LED : 1. Warm-up 2. MW detection
(DIP switch ON or Walk test)
Operating temperature -30– +60°C (-22– +140°F) -20– +45°C (-4– +113°F) -20– +60°C (-4– +140°F) -20– +45°C (-4– +113°F)
Environment humidity 95% max.
IP rating IP55
Mounting Wall, Pole (Outdoor, Indoor)
Mounting height 0.8 – 1.2 m (2.64 ft – 3.94 ft)
Weight 400 g (14.1 oz.) 450 g (15.9 oz.) 500 g (17.6 oz.) 550 g (19.4 oz.)
Accessories Screw (4 x 20 mm) x 2, Wiring sponge x 3, Masking seal x 3 Connector for POWER and ALARM,Connector for TROUBLE,Screw (4 x 20 mm) x 2, Masking seal x 3

＊ Specifications and design are subject to change without prior notice.

VXS-AM/DAM

Dimensions

VXS-RAM/RDAM

Unit（mm）

Contact phone number

Headquarters
+81-77-579-8004

Contact form

Click here for contact form

Support information

Support