High Mount Outdoor PIR / Combination Detector : HX-40 Series
High mount (2.5 m - 3 m) outdoor PIR with 40 ft range
| Wired Model |
|---|
| HX-40 [Standard] |
| HX-40AM [with active IR anti-masking] |
| Battery Operated Model |
|---|
| HX-40DAM [Dual technology with active IR anti-masking] |
| HX-40RAM [Battery Operated] |
Features
- Mounting height 2.5 m - 3 m
- Intelligent AND detection logic
- Dual signal processing circuit
– Summer night compensation logic
– Advanced temperature compensation logic - Vegetation sway analysis logic
- Double conductive shielding
- Ideal detection area setting
– adjustable detection length
– spot area flexible masking - 180° angle adjustable bracket / hood
Intelligent AND detection logic
Catch performance
The HX Series features superb Catch Performance. The most important element in reliable outdoor detector is accuracy to distinguish a human from a pet. The exclusive pyro element on board enables the HX to project an ideal detection pattern, thus allowing for more accurate detection of humans and less false alarms.
Active IR digital anti-masking
When an object is placed close to the lens surface, for a period of more than 180 seconds, the IR Anti-Masking circuit will activate and generate a trouble signal.
Slope friendliness
Not all outdoor ground is flat like most indoor environments. Steep slopes can cause negative effects on the catch performance feature. The adjustable included bracket enables the HX to maintain the optimal catch performance.
Adjustability
Outdoor environments are full of false alarm factors like vegetation and reflective surfaces. Pre-survey before installing enables you to find the ways to minimize possible false alarms.
The HX detection pattern can easily be adjusted to avoid these possible false alarms by using the included masking strips.
Battery box for numerous battery types
Double conductive shielding
By using our double conductive shielding, the visible light disturbance and RFI can be blocked.
Application Examples
Coverage
Specifications
Dimensions
| Model | HX-40 | HX-40AM | HX-40DAM | HX-40RAM |
|---|---|---|---|---|
| Detection method | Passive infrared | |||
| Coverage | 12 m (40 ft.) 85° wide / 94 zones | |||
| PIR distance limit | 4 m, 5.5 m, 9 m, 12 m (13 ft, 18 ft, 30 ft, 40 ft.) | |||
| Detectable speed | 0.3 – 1.5 m/s (1 – 5 ft/s) | |||
| Sensitivity | 2.0°C (3.6°F) at 0.6 m/s | |||
| Power input | 9.5 – 18VDC | 2.5 – 9VDC, 3 - 7.2VDC Lithium Battery, (CR123A x 3, CR2 x 3, 1/2AA x 3, 1-2AA x 6) | ||
| Detectable speed | 0.3 to 2.0 m/s (1' to 6'7/s) | |||
| Sensitivity | Normal : 2.0°C (3.6°F) at 0.6 m/s
Extreme high : 1.0°C (1.8°F)at 0.6 m/s selectable for each side individually |
|||
| Power input | 9.5 to 18 VDC | 3 to 9 VDC Lithium or Alkaline batteries | ||
| Current draw | 35 mA (max) at 12 VDC | 40 mA (max) at 12 VDC | 50 mA (max.)at 12 VDC | 30 μA (standby) / 4 mA (max.) at 3 VDC |
| Alarm period | 2.0 ±1 sec | |||
| Warm-up period | Approx. 60 sec (LED blinks) | Approx. 90 sec. (LED blinks) | ||
| Alarm output | Form C 28 VDC 0.2 A max | Form C - Solid State Switch - 10 VDC 0.01 A max | ||
| Tamper output | N.C. 28 VDC, 0.1 A max. N.C. open when cover is removed. | Form C. 28 VDC, 0.1 A max. changes when cover is removed | ||
| Trouble output | - | N.C. 28 VDC, 0.1 A max | N.C./N.O. Selectable - Solid State Switch - 10 VDC 0.01 A | |
| Aux input | N.C. 28 VDC, 0.1 A max | - | ||
| LED indicator | Red:Warm-up, Alarm | Red:Warm-up, Alarm, Trouble | Red:Warm-up, Alarm, Trouble Green:Warm-up, PIR detect, Trouble Yellow:Warm-up, MW detect | Disable : During normal operation. Enable : During WALK TEST or LED SW on. Red : Warm-up, Alarm, Trouble, Low battery |
| RF Interference | No alarm 10 V/m | |||
| Operating temperature | -20 – +60°C (-4 – +140°F) | |||
| Environment humidity | 95% max. | |||
| International protection | IP55 | |||
| Mounting | Wall (Outdoor, Indoor) | |||
| Mounting height | 2.5 - 3.0 m (8.3 - 10 ft.) | |||
| Bracket adjust angle | Vertical: ±20° Horizon: ±95° | |||
| Weight | 600 g (21.2 oz) | 700 g (24.7 oz) | 600g (21.2 oz) | |
| Accessories | Bracket, Hood, Area masking seal, Screw kit (3×10-2, 4×20-4) | Bracket, Hood, Area masking seal,Screw kit (3×10-2, 4×20-4), Battery lead×2, Dummy battery kit | ||
＊ Specifications and design are subject to change without prior notice.
Unit (mm)
Contact phone number
- Headquarters
- +81-77-579-8004
Contact form
Support information