PIR Detector / PIR Microwave Combination Detector : FlipX Series
Standard Model
- FLX-S-ST[Standard]
- FLX-S-DT[Dual technology]
Professional Model
- FLX-P-ST[Standard]
- FLX-P-DT[Dual technology]
Advanced Model
- FLX-A-AM[Active IR anti-masking]
- FLX-A-DAM[Dual technology with active IR anti-masking]
Standard Model
-12 m (40 ft.) 85 degree Wide
-18 m (60 ft.) Narrow
• FLX-S-DT-X5 : 10.525 GHz
• FLX-S-DT-X8 : 10.587 GHz
• FLX-S-DT-X9 : 9.425 GHz
Professional Model
-15 m (50 ft.) 85 degree Wide
-24 m (80 ft.) Narrow
• FLX-P-DT-X5 : 10.525 GHz
• FLX-P-DT-X8 : 10.587 GHz
• FLX-P-DT-X9 : 9.425 GHz
Advanced Model
-15 m (50 ft.) 85 degree Wide
-24 m (80 ft.) Narrow
• FLX-A-DAM-X5 : 10.525 GHz
• FLX-A-DAM-X8 : 10.587 GHz
• FLX-A-DAM-X9 : 9.425 GHz
FlipX is the indoor motion detector not only with a lot of highly evaluated features for existing indoor motion detectors but also with know-how obtained from our experiences of outdoor motion detector development.
Concept of FlipX series
Flip Lens
Selectable wide & narrow area with one lens. By turning the lens upside down, the shape of detection area can be changed from WIDE to NARROW.
Easily Viewable LED Color
LED color is green and viewable from distance.
Human-Catch Element
The new element size has been designed to create proper detection areas and optimize detection sensitivity.
Refined Spherical Lens
Spherical lens provides a precise focal length to each of the multiple lens segments which enables each lens segment to face precisely towards its detection area and creates detection zones without distortion.
180 Degree Cover Lock
Front cover can be opened & closed by turning the lock 180 degrees with a flat blade screwdriver.
SMDA Logic
By analyzing detection patterns and environmental information, SMDA improves immunity against various noise factors such as climate changes and vegetation sways, and can distinguish between the cause of nuisance false alarms and genuine intrusions.
Introdcution of FlipX Standard model
Specific Feature
Pet Tolerance
Standard model gives high false alarm protection with excellent tolerance to spot temperature changes from small animals and pet.
Application Examples
Introdcution of FlipX Professional model
Specific Features
PEU Socket
Optional PEU(Plug-In End Of Line Unit) are available for FlipX Professional model. PEU can be inserted into the PEU socket on PCB. You don't have to connect axial resistors into terminals with signal cables to differentiate between alarm, trouble and tamper signals.
Application Examples
Introdcution of FlipX Advanced model
Specific Features
Removable Terminal Block
Terminal block can be removed from Back Plate for easy wiring, easy replacement of the item with no access to key parts on Main Unit.
Double Protection Anti-Masking
FlipX has IR Anti-masking function generating a trouble signal when detector is masked.
Down Zone Switch
Downzone detection area is selectable “ON” or “OFF”.
EOL Resistor Socket
You don’t have to connect axial resistors into terminals with signal cables to differentiate between alarm, trouble and tamper signals.Axial resistors & optional PEU(Plug-In End Of Line Unit) are available for FlipX. Either axial resistors enclosed to Control Panel or optional PEU can be inserted into the EOL Resistor Socket.
Super High Sensitivity
Even if temperature between human and background becomes close, Super High PIR Sensitivity can be selectable to provide far greater catch performance for the site where mis-alarm is unacceptable.
Application Examples
Options
Specifications
Coverage
Dimensions
(No MW detection at “Narrow” setting) |
(No MW detection at “Narrow” setting) |
|||||
11 mA (max.) at 12 VDC |
14 mA (max.) at 12 VDC |
11 mA (max.) at 12 VDC |
14 mA (max.) at 12 VDC |
16 mA (max.) at 12 VDC |
21 mA (max.) at 12 VDC |
|
(with Bracket : Wall, Corner, Ceiling) |
||||||
＊ Specifications and designs are subject to change without prior notice.
＊ These units are designed to detect an intruder and activate an alarm control panel. Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion.
＊ Advanced models (FLX-A-AM and FLX-A-DAM) are certified to NF&A2P when operation temperatures are -10℃ to +55℃(14°F to +131°F).
Standard Model
- The dotted line indicates the recommended mounting height.
- When “Narrow” is selected at the jumper pin, MW detection will be stopped.
- Narrow area settings are not certified to the following standards.EN 50131-2-2:2017(FLX-S-ST)/EN 50131-2-4:2020, INCERT and SBSC.
Advanced and Professional Model
- The dotted line indicates the recommended mounting height.
- When“Narrow”is selected in the lens setting, MW detection will be stopped.
- Down zone * can be deleted by switch setting.
- Narrow area setting of FLX-A-DAM is not certified to NF&A2P.
- Narrow area settings are not certified to the following standards.EN 50131-2-2 (FLX-P-ST)/EN 50131-2-4 (FLX-P-DT), INCERT and SBSC
Standard and Professional Model
Advanced Model
Unit（mm）
Contact phone number
- Headquarters
- +81-77-579-8004
Contact form
Support information