Battery Operated Short Range Model : SL-TNR Series
- SL-100TNR[30m]
- SL-200TNR[60m]
The SL-TNR offers a cost-effective and versatile solution to protect a perimeter lineup to 60 m long, where cabling is an issue or inconvenient. Both the transmitter and receiver beam can be battery powered using D size lithium battery or universal CR123A batteries and the receiver can also be hard-wired.
Features
- Universal powered operation
- D size lithium battery x 4pcs
- CR123A lithium battery x 16 pcs (OPTION CRH-5)
- 12-24VDC hardwired operation of the detector. (OPTION PCU-5)
- Versatile alarm signal operation
- IR signal technology transmits the low battery status to the receiver.
- Simplified battery replacement
- Easy to access the battery holder and change batteries.
Options
VIZTRO D size lithium battery : SB-D02HP
For SL-TNR
Specifications
Dimensions
| Model | SL-100TNR | SL-200TNR | |
|---|---|---|---|
| Maximum detection range | 30 m | 60 m | |
| Maximum arrival distance | 265 m | 530 m | |
| Detection method | Twin infrared beam interruption detection | ||
| Interruption time | Variable between 50/100/250/500 ms (4 steps) | ||
| Power source | 3.6 to 3.9 VDC D size lithium batteries Each Transmitter and Receiver: 2 units (Recommended SB-D02HP manufactured by VITZROCELL)
3.0 VDC CR123A lithium batteries Each Transmitter and Receiver: 8 units (with operational battery holder CRH-5: 2 units) |
||
| Current draw (stand by/at 25°C) | 3.6 to 3.9 VDC D size Lithium battery | Total:Approx. 500 μA Transmitter:Approx. 200 μA Receiver:Approx. 300 μA |
Total:Approx. 600 μA Transmitter:Approx. 300 μA Receiver:Approx. 300 μA |
/tr>
| 3.0 VDC CR123A | Total:Approx. 600 μA Transmitter:Approx. 200 μA Receiver:Approx. 400 μA |
Total:Approx. 700 μA Transmitter:Approx. 300 μA Receiver:Approx. 400 μA |
/tr>
|
| Battery life * | D size Lithium battery | Transmitter:Approx. 6 years Receiver:Approx. 5 years |
Transmitter:Approx. 5 years Receiver:Approx. 5 years |
| CR123A | Transmitter:Approx. 1.5 years Receiver:Approx. 1 year | Transmitter:Approx. 1 year Receiver:Approx. 1 year | |
| Output | Alarm output | Form C-Solid State Switch: 3.6 VDC, 0.01 A | |
| Alarm period | 2 sec (±1) (Nominal) | ||
| Low battery output | N.C. (Solid State Switch): 3.6 VDC, 0.01 A | ||
| Cover tamper output(Receiver) | N.C. (Solid State Switch): 3.6 VDC, 0.01 A Opens when the battery cover removed. | ||
| Indicator LED | Alarm Indicator (Receiver) | ON:Beam not received
Blinking:Beam not received sufficiently OFF:Beam received |
|
| Power/ Low battery indicator (Transmitter and Receiver) | ON:Power ON Blinking:Voltage reduction OFF:Power OFF |
||
| Operating temperature | -20°C to +60°C (-4 to 140°F) | ||
| Operating humidity | 95% (max.) | ||
| Alignment angle | ±90° Horizontal, ±5° Vertical | ||
| Dimension | H x W x D mm (inch):295 x 69 x 117 | ||
| Weight | Approx. 1,200 g (Total weight of Transmitter + Receiver, excluding accessories) | ||
| International protection | IP65 | ||
* Above battery life are confirmed with SB-D02HP manufactured by VITZROCELL or CR-123A manufactured by PANASONIC that they are used within the ambient temperature range of 20 to 25 ?. By using batteries other than these recommended and due to the site conditions, the battery life can be shortened and low battery signal can be generated in extremely short period. In such case, periodic battery replacement is recommende
– Specifications and design are subject to change without prior notice.
Unit（mm）
Contact phone number
- Headquarters
- +81-77-579-8004
Contact form
Support information