Active infrared sensor OS-12C T
- OS-12C T
Safety
CE
The OPTEX OS-12CT active infrared safety beam system is compatible with any type of automatic door. Its control box and beam heads are designed for fast, simple installation while maintaining the highest standards of safety and reliability.
The OS-12CT has monitoring capability. It monitors all of its critical functions and notifies controls if an error occurs. Self-monitoring capability ensures a higher level of performance over the life of the sensor.
Features
- Easy Installation
The OPTEX OS-12CT amplifier has screwless wiring terminals, which enables faster installation. Pressing the “Teach-In” button automatically sets the correct sensitivity and self-corrects crossed cables. One amplifier operates one or two pairs of sensor heads. - Reliable Sensor Heads
The OPTEX SH-7MC/SH-10MC sensor heads are recognized by door professionals worldwide for their reliability and resistance to sunlight and other interference. Quick-disconnect plugs make installation and service fast and easy. Cables are available in 2 lengths, 7 m (23 feet) or 10 m (33 feet). - Safety
For maximum safety, the amplifier is fail-safe, ensuring that the doors will remain open in the event of any damage to the components. Two LED indicators will blink at the initial setup to alert the installer if the OS-12CT is improperly aligned or if sensitivity is insufficient. - Multifunctional Design
The compact design and standard 15 mm beam heads mean the OS-12CT is compatible with any type of automatic door and is easy to service or maintain. Optional mounting accessories allow surface or recessed installation and include a reflector kit for simplified wiring. This safety beam is optimal for use with any sliding door, including train doors and automatic gates. - Monitoring Capability
The OS-12CT has monitoring capability. It monitors all of its critical functions and notifies controls if an error occurs. Self-monitoring capability ensures a higher level of performance over the life of the sensor.
Options
Mounting plate (Silver)
PP-S (2pcs)
Sensor head unit
SH-7MC: 7 m
SH-10MC: 10 m
Sensor head holder (Black/Gray)
OS-BH (2pcs)
One push outer plate
PO-C (2pcs)
Specifications
Dimensions
Model | OS-12C T | |
---|---|---|
Installation Distance | Less than 10m (32'10'') | |
Detection method | Point to point near infrared light beam | |
Power Supply | 12 to 24V AC 12 to 30V DC |
|
Current Draw | 160mA Max. | |
Operation indicator | Stand-by: Green ON (Beam1) /Red ON (Beam2) Detection active: Green OFF (Beam1) /Red OFF (Beam 2) Insufficient sensitivity: Green blinking (Beam1) /Red blinking (Beam2) Test input error: Simultaneous twice blinking (Red & Green) |
|
Test input | Opto coupler voltage 5 to 30VDC Current 6mA Max. (30VDC) |
|
Safety Output (Initial setting) | 50V 0.3A (Resistance Load) N.O./N.C. Switchable |
|
Response time | Approx. 0.1 sec (from the moment of beam cut-off) | |
Relay Hold Time | Approx. 0.5 sec | |
Operating temperature | -20°C to +55°C (-4°F to 131°F) | |
Weight | Amplifier: 63g (2.2 oz) | |
Component | 1 Amplifier 2 Mounting screws 1 Manual (Optional sensor head is necessary for operation) |
* It is possible to use OS-12C T as an amplifier for 1 or 2 beam use by attaching a separately sold SensorHead.
mm (inch)
- The specifications herein are subject to change without prior notice due to improvements.
Contact phone number
- Headquarters
- +81-77-579-8700
Contact form
Support information