MIRAGE T
MIRAGE T is an upgraded model of MIRAGE, designed to be installed in the header of the door operator or ceiling mounted with EN 16005 compliance.
・Active Infrared Technology
・EN16005 compliant
・Flexible area adjustment
・Max. 3.0m mounting height
| Products Name |
|---|
| MIRAGE T |
Features
- Flat design
As with MIRAGE, it makes that a complete flat design when installed in the header of the door operator or ceiling. It's an optimal option for doors where design is important, such as in office buildings and commercial facilities, or doors where dust prevention is required, such as in hospitals. - Flexible area adjustment
In addition to the depth area , range of width area can be finely adjusted by dipswitch. It's usable to use as an activation and safety sensor as well as sidescreen safety application. - EN16005 compliant
It complies with the European safety standard EN16005 for further improving safety. - Switchable to header mounted sensor
New dedicated surface mount kit (sold separately) makes it switchable to header mounted sensor, flexible to sudden changes for the position of installation.
Detection Area
Specifications
Dimensions
Emitting area
Depth angle : 0°
| A | 2.00 (6'7") | 2.20 (7'3") | 2.50 (8'2") |
|---|---|---|---|
| B | 0.04 (2") | 0.05 (2") | 0.05 (2") |
| C | 0.20 (8") | 0.22 (9") | 0.25 (10") |
| D | 0.46 (1'6") | 0.50 (1'8") | 0.57 (1'11") |
| E | 0.84 (2'9") | 0,92 (3') | 1.05 (3'5") |
| F | 1.34 (4'5") | 1.48 (4'10") | 1.68 (5'6") |
| G | 0.08 (3") | 0.08 (3") | 0.10 (4") |
| H | 0.22 (9") | 0.25 (10") | 0.28 (11") |
| I | 0.49 (1'7") | 0.54 (1'9") | 0.61 (2') |
| J | 0.98 (3'3") | 1.08 (3'6") | 1.23 (4') |
| K | 1.02 (3'4") | 1.12 (3'8") | 1.27 (4'2") |
| L | 2.03 (6'8") | 2.24 (7'4") | 2.54 (8'4") |
Detection area
To comply with EN 16005, make sure that the detection area is within the values of the chart below.
| A | 2.00 (6'7") | 2.20 (7'3") | 2.50 (8'2") |
|---|---|---|---|
| D | 0.43 (1'5") | 0.43 (1'5") | 0.56 (1'10") |
| J | 0.97 (3'2") | 1.04 (3'5") | 1.12 (3'8") |
| L | 2.06 (6'9") | 2.23 (7'4") | 2.26 (7'5") |
Test conditions required by EN 16005<br>
Floor : Grey paper<br>
Detection object : EN 16005 CA reference body<br>
Sensitivity : Middle<br>
Speed of detection object : 50 mm/s<br>
* The actual detection area may become smaller depending on the ambient light, the color/material of the object or the floor as well as the entry speed of the object.
* The sensor may not be activated when the entering speed of the object or a person is slower than 50 mm/s or faster than 1500 mm/s.
| Model | MIRAGE T |
|---|---|
| Color | Black |
| Mounting height | 2.0 to 3.0m (6'7" to 9'10") (2.0 to 2.5m(6'7" to 8'2") for EN 16005 compliance) |
| Detection area | See Detection area |
| Detection method | Active infrared reflection |
| Depth angle adjustment | -6 to +2° |
| Power supply(*1) | 12 to 24 VAC±10 &(50/60 Hz) 12 to 30 VDC±10 % |
| Power consumption | < 1.5 W (< 2.5 VA at AC) |
| Output hold time | Approx. 500 ms |
| Response time | < 300 ms |
| Operating temperature | -20 to +55℃ (-4 to 131°F) |
| Operating humidity | < 80 % (non-condensing) |
| Activation output | Form A relay 50 V 0.3 A Max. (Resistance load) |
| Safety output | Form A relay 50 V 0.3 A Max. |
| Test input | Opto coupler Voltage 5 to 30VDC Current 6 mA Max.(30 VDC) |
| IP rate | IP54 |
| Category | 2(EN ISO 13849-1:2015) |
| Perfomance level | d(EN ISO 13849-1:2015) |
| ESPE | Type 2 |
| Weight | 210 g (7.4 oz) |
| Accessories | 1 Cable 3 m (9'10")(*2) 1 Operation manual 1 Area adjustment tool 1 Adjustment frame 1 Dust proof sticker |
*2 : Overcurrent protection with less than 2 A.
mm (inch)
- The specifications herein are subject to change without prior notice due to improvements.
Contact phone number
- Headquarters
- +81-77-579-8700
Contact form
Support information