|
 Model |
|
PT-S80 |
PT-U80 |
| Measuring range |
-30 to 600°C |
| Field of view |
 30mm/1000mm [D:S=33:1] |
| Optics |
Si lens |
| Sensing element |
Thermopile |
| Wavelength |
8 to 14 μm |
| Response time |
0.5 sec. / 90 % |
Accuracy (ε 0.95) |
−30.0 to 0°C:3°C,0.1°C to 200°C:2°C,201°C
to 600°C:1% |
| Repeatability |
1°Cof reading value |
| Display resolution |
-30.0 to 199.9ºC: 0.1ºC, 200 to 600ºC: 1 % |
| Sighting method |
Coaxial Laser marker (Class
2) |
| HOLD time |
15 seconds |
Continuous
measurement mode |
N / A |
ON/OFF Selectable |
| USB output |
N / A |
Available |
| Data storing |
| Single memory |
35-point memory
(max 150-point) |
|
| Back light |
EL back light |
| High / Low alarm |
Alarm LED, Buzzer, (ON/OFF
Selectable) |
Emissivity (E)
adjustment |
0.95 / 0.85 / 0.70 Selectable |
ε(0.3 to 1.20 / 0.01 step) |
| Display function |
NOR/MAX/MIN |
| Power supply |
AA alkaline battery (2 pieces) |
| Battery life |
15 hours (with max load) |
Ambient
temperature |
0 to 50°C |
| Ambient humidity |
35 to 85 % RH (no condensation) |
Storage temperature
/humidity |
−10 to 60°C/35 to 85% RH |
| Material |
ABS/TEEE |
| Dimensions |
H×W×D = 182×56×38mm |
| Weight |
Approx. 230 g (including
batteries) |
|
 |
Accessories: Size AA alkaline battery (two) for operation
check, Instruction manual, Protective case for PT-S80/U80, USB cable
(for PT-U80 only), Optional: Black body tape HB-250 |
|
Specifications are subject to change for product improvement
without prior notice. |
|
|
|
 |
|
 |
|
Protective case |
 
|
|
 |
 |
 |
| The Black Tape (HB-250) is designed for more accurate
measurement, especially if the target object has a shiny surface.
Apply HB-250 on the surface of the target and measure the area
covered by HB-250 with emissivity setting at 0.95. |
|
|
|
|
 |
| · |
When the surface being measured is reflective, such
as polished metal.
(Before measuring,
apply the optional HB-250 tape or apply a matte finish.) |
| · |
When measuring through glass |
|
 |
| · |
Please read through the instruction manual before use. |
| · |
This product is not a clinical thermometer, therefore,
cannot be used for medical purposes. |
| · |
Keep the thermometer away from water contact, as it
is not waterproof. |
| · |
Avoid rapid change of the ambient temperature, as this
may cause measurement error. |
| · |
eep the thermometer away from strong electromagnetic
sources. |
|
 |
| · |
This product uses laser classified as class II complying
with JIS C 6802. |
| · |
For safe use, follow the warning labels attached to
this product. |
| · |
This is a portable product with the laser maker certificated
by JQA (Japan Quality Assurance of Organization). |
|
|
|
Copyright(c) 1999-2005 OPTEX CO., LTD. All Rights Reserved. |
|
