Security Site Top > OUTDOOR DETECTORS> VXI-DAM

OUTDOOR DETECTORS PRODUCT LINEUP

VXI-DAM
B ZONE
LEVEL SURVEILLANCE

OUTDOOR PIR/ MICRO-WAVE COMBINATION DETECTOR

The VX InfinityTM series provide highly reliable detection functions, reducing false reports or report losses.
The VX InfinityTM series deliver stable detection performance even in severe outdoor environments.

industrial

industrial

industrial

commercial

commercial

light commercial

commercial

residential



FEATURES

Tough mod dual technology based on OPTEX gold-plated microwave module

Active IR anti-masking for detecting covering objects

12 m (40 ft.) by 90 degree flexible detection pattern adjustable to 5 ranges

SMDA logic for advanced temperature compensation and environmental noise immunity

Easy masking for over spill prevention

Double conductive shielding against bright light disturbance

Conduit/TX-battery case for both wired and wireless-ready models


COVERAGES
ranges_image
ranges_image

DIMENISIONS
dimension_image
Unit:mm(inch)

SPECIFICATIONS

Model VXI-DAM
Detection method Passive infrared & Microwave
PIR coverage 12.0 m (40 ft) 90° wide / 16 zones
PIR distance limit 12 - 2.5 m (5 levels)
Detectable speed 0.3 – 1.5 m/s (1 - 5 ft/s)
Sensitivity 2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
Power input 9.5 – 18 V DC
Current draw 35 mA (max) at 12 V DC
Alarm period 2.0 ±1 sec.
Warm-up period Approx. 60 sec. (LED blinks)
Alarm output N.C. / N.O. Selectable 28 V DC 0.1 A (max)
Trouble output N.C. 28 V DC 0.1 A (max)
Tamper output N.C.28 V DC 0.1A (max) open when cover removed.
LED indicator Red: Warm-up, alarm,
masking detection.
Yellow: Warm-up, MW detect.
RF interference No alarm 10 V/m
Operating temperature -20 – +45°C (-4 – +113°F)
Environment humidity 95% max.
International protection IP55
Mounting Wall, Pole (Outdoor, Indoor)
Mounting height 0.8 – 1.2 m (2.64 ft – 3.94 ft)
Weight 600 g (21.2 oz.)
Accessories Screw (4×20 mm) ×2 , Wiring sponge ×3 , Masking seal ×3
Specifications and design are subject to change without prior notice.


OPTIONS
Plug in EOL(End of line) Resistor Modules
Different values of EOL resistances can be instantly set by plugging in optional modules. Please refer to the relevant control panels manual to confirm matching resistance values.

Item Trouble Alarm Tamper Panels
PEU-B 6.8K 4.7K 4.7K Old GE/Aritech
PEU-C 12.0K 1.1K 1.1K Honeywell Galaxy (U.K.)
PEU-D 3.0K 1.1K 1.1K Honeywell Galaxy (Benelux)
PEU-E 15.0K 1.1K 1.1K Satel
PEU-F 5.6K 5.6K 5.6K DSC
PEU-G 8.2K 8.2K 8.2K Guardall
PEU-H 2.2K 4.7K 2.2K Old Texecom, Cooper, Scantronics etc.
PEU-I 1.0K 3.3K 3.3K New Texecom, NetworX, Inim
PEU-J 12.0K 6.8K 4.7K Risco ProSYS
PEU-K 2.2K 1.0K 1.0K Siemens SPC
No warranty is given as to the fitness of this option with noted avobe manufacture`s product.
Please check on specifications of a control panel before you buy this option.
Some models do not have a trouble output.