Security Site Top > OUTDOOR DETECTORS> BXS-RAM

OUTDOOR DETECTORS PRODUCT LINEUP

BXS-RAM
B ZONE
LEVEL SURVEILLANCE

BATTERY OPERATED BOUNDARY OUTDOOR DETECTOR

industrial

commercial

commercial

light commercial

commercial

residential



FEATURES

IR digital anti-masking function

4 PIR technology

24m (80 ft.) 12 m (40 ft.) on each side adjustable to 5 ranges (2.5m, 3.5m, 6.0m, 8.5m, 12.0m)

Individual detection area and sensitivity setting

Extreme high detection mode

SMDA logic for advanced temperature compensation

Individual signal outputs (right / left)

Double conductive shielding against bright light disturbance

Back tamper

Automatic walk test mode


COVERAGES
ranges_image
ranges_image

Top


DIMENISIONS
dimension_image
Unit:mm(inch)

Top


SPECIFICATIONS

Model BXS-RAM
Detection method Passive infrared
Coverage 24 m (80') ; 12 m (40') on each side,
4 zones ; 2 zones on each side, 180°narrow
PIR distance limit 2.5 to 12 m (5 levels)
Detection angle from wall to Wall : 0
away Wall : 3
selectable
Detectable speed 0.3 to 2.0 m/s (1' to 6'7"/s)
Sensitivity Normal ; 2.0C (3.6F) at 0.6 m/s
Extreme high : 1.0C(1.8F) at 0.6 m/s
selectable for each side individually
Power input 3 to 9 V DC Lithium or Alkaline batteries
Current draw
(except walk test)
16 μA stand-by / 8 mA max. at 3 V DC
Alarm period 2.0 ±1 sec.
Warm-up period 60 sec. or less (LED blinks)
Alarm output (R) Solidstate switch, 10 V DC 0.01 A max.
[Individual;Right or General], [N.O. or N.C.] are selectable
Alarm output (L) Solidstate switch, 10 V DC 0.01 A max.
[Individual;Left or General], [N.O. or N.C.] are selectable
Trouble output Solidstate switch, 10 V DC 0.01 A max. [N.O. or N.C.] is selectable
Tamper output Tamper output is shared with trouble output.
LED indicator Red LED ; 1. Warm-up
2. Alarm , 3. Masking detection
(DIP switch ON or Walk test)
Operating temperature -30°C to + 60°C (-22°F to +140°F)
Environment humidity 95% max.
International protection IP55
Mounting Wall, Pole (Outdoor, Indoor)
Mounting height 0.8 to 1.2 m (2'7" to 4')
Weight 550 g (19.4 oz.)
Accessories [1] Connector for POWER and ALARM (R), [2] Connector for ALARM (L),
[3] Connector for TROUBLE, [4] Velcro tape, [5] Screw (4x20 mm) x 2
?Specifications and designs are subject to change without prior notice.
?These units are designed to detect an intruder and activate an alarm control panel.
Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion.

Top


OPTIONS
PLUG-IN EOL
(PEU)
 
BXS Face cover
(White / Silver / Black)
 

BXS Back box
(White / Black)
 
BXS Back box Cap
(White / Silver / Black)
 

BXS Pole mount plate
Metal band: 23 mm or less in width
BATTERY BOX
(RBB-01)
 

Top