Security Site Top > OUTDOOR DETECTORS> SL-100TNR/200TNR

OUTDOOR DETECTORS PRODUCT LINEUP

SL-100TNR/200TNR
A ZONE
LEVEL SURVEILLANCE
ax-100tf/200tf
Catalog PDF
HX-40

Manual PDF
Product photo
HX-40

SHORT RANGE BATTERY OPERATED PHOTOELECTRIC DETECTOR

The SL-TNR offers a cost-effective and versatile solution to protect a perimeter lineup to 60 m long, where cabling is an issue or inconvenient.
Both the transmitter and receiver beam can be battery powered using D size lithium battery or universal CR123A batteries and the receiver can also be hard-wired.

  • SL-100TNR – Detection range 30m

  • SL-200TNR – Detection range 60m

industrial

industrial

industrial

commercial

commercial

light commercial

OPTIONS

BCU-5 : Battery common Unit

CRH-5 : CR123 Battery Holder

PCU-5 : Power Convert Unit

SB-D02HP : VIZTRO D size Lithium battery

 

FEATURES

Universal powered operation
D size lithium battery x 4pcs
CR123A lithium battery x 16 pcs (OPTION CRH-5)

12-24VDC hardwired operation of the detector. (OPTION PCU-5)

Versatile alarm signal operation

IR signal technology transmits the low battery status to the receiver.

Simplified battery replacement

Easy to access the battery holder and change batteries.

Top

DIMENSION

dimension image
(mm)

Top

SPECIFICATIONS

Model SL-100TNR SL-200TNR
Maximum detection range 30 m 60 m
Maximum arrival distance 265 m 530 m
Detection method Twin infrared beam interruption detection
Interruption time Selectable from 50/100/250/500 ms (4 selections)
Power Source 3.6 to 3.9 VDC
D size lithium batteries
Each Transmitter and Receiver: 2 units
(Recommended SB-D02HP manufactured by VITZROCELL)
3.0 VDC
CR123A lithium batteries
Each Transmitter and Receiver: 8 units
(with operational battery holder CRH-5: 2 units)
Current draw
(stand by/at 25°C)

3.6 to 3.9 V DC
D size Lithium
battery
Total:Approx. 500 μA
Transmitter:Approx. 200 μA
Receiver:Approx. 300 μA
Total:Approx. 600 μA
Transmitter:Approx. 300 μA
Receiver:Approx. 300 μA
3.0 V DC
CR123A
Total:Approx. 600 μA
Transmitter:Approx. 200 μA
Receiver:Approx. 400 μA
Total:Approx. 700 μA
Transmitter:Approx. 300 μA
Receiver:Approx. 400 μA
Battery
life*

D size Lithium battery Transmitter:Approx. 6 years
Receiver:Approx. 5 years
Transmitter:Approx. 5 years
Receiver:Approx. 5 years
CR123A Transmitter:Approx. 1.5 years
Receiver:Approx. 1 year
Transmitter:Approx. 1 year
Receiver:Approx. 1 year
Output Alarm output Form C-Solid State Switch: 3.6 VDC, 0.01 A
Alarm period 2 s (±1)
Low battery output N.C. (Solid State Switch): 3.6 VDC, 0.01 A
Cover tamper output(Receiver) N.C. (Solid State Switch): 3.6 VDC, 0.01 A Opens when the battery cover removed.
Indicator LED Alarm Indicator
(Receiver)
ON:Beam not received
Blinking:Beam not received sufficiently
OFF:Beam received
Power/ Low battery
indicator (Transmitter and Receiver)
ON:Power ON
Blinking:Voltage reduction
OFF:Power OFF
Operating temperature -20C to +60C
Operating humidity 95% (Max.)
Alignment angle ±90° Horizontal, ±5° Vertical
Dimension H x W x D mm : 295 x 69 x 117
Weight 1200 g (Total weight of Transmitter + Receiver, excluding accessories)
International protection IP65
Specications and designs are subject to change without prior notice.
* Above battery life are confirmed with SB-D02HP manufactured by VITZROCELL or CR-123A manufactured
by PANASONIC that they are used within the ambient temperature range of 20 to 25 ?. By using batteries other than
these recommended and due to the site conditions, the battery life can be shortened and low battery signal can be
generated in extremely short period. In such case, periodic battery replacement is recommende

Top

OPTIONS

BATTERY COMMON UNIT BCU-5

The BCU-5 allows to share the power source and the low battery signals between the beam and the wireless transmitter.
 


Input voltage 3.2 - 4.0 VDC
Low battery input (EX+/-) N.C. input only
Current draw Approx. 5 μA at 3.6 VDC (no load)
Output voltage Normal Approx. 3.0 - 3.6VDC
Low batter Approx. 2.0 - 2.6VDC
Output current 100 mA (max.)
Operating temperature -20°C - +60°C (-40°F - +140°F)
Operating humidity 95% (max.)

CR123 BATTERY HOLDER CRH-5 (2 pcs / package)

The CRH-5 is a pack of two battery holders each with a capacity of 4 batteries needed when using CR123A batteries. Each holder can contain 4 batteries, 8 batteries are needed on each beam.


POWER CONVERT UNIT PCU-5

The PCU-5 is a voltage converter nedded to hard wire the receiver and transmitter.
 



Power input 10.5 - 30 VDC
Current draw 80mA (max.)
Output voltage Approx. 3.9 VDC
Output current 10mA (max.)
Alarm output Form C relay ; 30VDC. 0.2A
Low battery output N.C. relay ; 30VDC. 0.2A
Tamper output N.C. relay ; 30VDC. 0.2A
Operating temperature -20°C to 60°C (-4°F to 140°F)
Operating humidity 95% (max.)
Dimension H×W×D mm (inch): 71 (2.8) × 53 (2.1) × 20 (0.8)

Nominal voltage (at 6mA, 20°C) 3.9V
Nominal capacity (at 6mA, 20°C, 2.0V cut off) 16.0Ah
Maximum recommended continuous current (Higher currents are possible, consult Vitzrocell) 150mA
Max. pulse discharge current 250mA
Weight 95±3.0g
Operating temperature range -40 to 85°C

UL certificates MH18384

Top

aaaaaaaaaaaa