Security Site Top > OUTDOOR DETECTORS> SL-200QDP/350QDP/650QDP

SL-200QDP/350QDP/650QDP
(STANDARD MODELS)

The IR transmitter and receiver must be perfectly aligned in order to achieve optimal operation of photoelectric detector.
However, a lot of patience, time and effort is required to ensure that the receiver is receiving the maximum amount of light possible from the transmitter.
Optex has the solution New SL series is designed to lighten your workload with achieving perfect alignment.

industrial

industrial

industrial

commercial

commercial

light commercial



FEATURES

Detection range 60m/100m/200m

High power quad beam

Double modulation

Upper/Lower beam selection button

Beam power control selector


SELECTION GUIDE
ranges_image

DIMENISIONS
dimension_image
Unit:mm(inch)

SPECIFICATIONS
Model STANDARD
SL-200QDP SL-350QDP SL-650QDP
Maximum detection range 60m / 200ft. 100m / 350ft. 200m / 650ft.
Maximum arrival distance 600m / 2000ft. 1000m / 3500ft. 2000m / 6500ft.
Detection method Quad infrared beam interruption detection
Selectable beam frequency 4 channels
Interruption time Variable between 50/100/250/500 ms (4 steps)
Power source Normal: 10.5 - 30 VDC
Current draw
(MAX)
Normal 10.5 - 30 VDC 17 mA (T:6 mA, R:11 mA) 22 mA (T:11 mA, R:11 mA)
Optical alignment 10.5 - 30 VDC 21 mA (T:7 mA, R:14 mA) 24 mA (T:10 mA, R:14 mA)
Output Alarm output Form C relay: 30 VDC, 0.2 A
Alarm period 2 sec (±1) (Nominal)
D.Q. output Form C relay: 30 VDC, 0.2 A
Low battery output -
Tamper output N.C. (contact output): 30 VDC, 0.1 A Opens when the cover removed.
Operating temperature -35°C - +60°C (-30°F - 140°F)
Operating humidity 95% (max.)
Alignment angle ±90° Horizontal, ±10° Vertical
Dimension H x W x D mm (inch): 448 (17.6) x 79 (3.1) x 96 (3.8)
Weight 2400 g (Total weight of the transmitter + receiver, excluding accessories)
International protection IP65
* Specifications and design are subject to change without prior notice.

OPTIONS

Anti Bird Cap ABC-4

Prevents birds and small animals from sitting on the detector. Protects the front of the detector from excessive rain and snow.

ABC-4

ABC-4

Back Cover BC-4

Conceal the back side of a pole mounted detector.

BC-4

Pole Side Cover
PSC-4

Conceal the gap between two pole mounted detectors in back to back.

PSC-4

Beam Alignment Unit
BAU-4

Align optical axis automatically.

BAU-4

ABC-4
Power input 24VAC/DC
Current draw 240mA (max.) / 1 unit
Thermo switch 60°C