OUTDOOR DETECTORS PRODUCT LINEUP
AX-250PLUS/500PLUS
A ZONE
LEVEL SURVEILLANCE
LONG RANGE PHOTOELECTRIC DETECTOR
-
AX-250PLUS – Detection range 75m
-
AX-500PLUS – Detection range 150m
industrial
light commercial
FEATURES
Lightning and surge protection
Anti-frost design
Twin beams require simultaneous interruption to create activation.
Easy installation and alignment
Sealed optics to prevent ingress of insects and dust
99% beam blocking stability
A.G.C. circuit
Adjustable beam interruption time
SPECIFICATIONS
| Model | AX-250PLUS | AX-500PLUS |
| Maximum detection range | 75m | 150m |
| Maximum arrival range | 750m | 1500m |
| Interruption period | 50 - 500 msec. | |
| Power supply | 10.5 - 30V DC | |
| Current consumption (transmitter + receiver) |
50mA (max.) | |
| Alarm period | 2 sec. (±1) nominal | |
| Alarm output | Form C relay 28V DC 0.2A max. | |
| Tamper switch | N.C. opens when cover is removed (Receiver only) | |
| Operating temperature | -25°C to +55°C | |
| Environmental humidity | 95% max. | |
| Alignment angle | ±90° Horizontal, ±10°Vertical | |
| Mounting | Wall and pole mounting | |
| Weight (transmitter+receiver) | 2700g | |
| Dimensions (H x W x D) | 400mm x 100mm x 104mm | |
| Weatherproof | IP54 | |
AX-250/500PLUS Series are cost-effective long-range dual beams for internal or external applications.
Suitable for external ranges up to 150m outdoors, the beams have twin infrared transmitters and receivers to reduce the potential for alarms from small animals, blowing debris and falling leaves. Beams operate by only triggering an alarm when both beams are broken simultaneously. Initial alignment can be carried out using the built in optical aiming device to roughly set the sensors and then fine-tuning can be carried out using a standard volt meter.