Super Redwall LRP-100QS detector has changed the industry’s perception of using passive infrared in outdoor applications. It is simple to install and align and reliable in operation. The use of four elements in a 100 metre detector is unique and underlines our continued commitment to development.
Newly equipped double conductive shielding helps reduce false alarms by card headlights and reflected sunlight.
Redwall detectors feature an advanced visual alignment system (pictured below). At installation, a small reflex viewer, supplied with each detector, can be plugged into the sensor’s front window and provides a view of the area to be protected. This method allows simple and quick alignment of the Redwall detector.
By looking through the viewfinder of the visual alignment aid, supplied with the LRP100QS, the installer can see the position of the long-range detection zones. This is used for initial alignment. For fine tuning, use of the walktester OPM-WT is strongly recommended (see below)
| Model | LRP-100QS |
|---|---|
| Detection method | Passive Infrared |
| Coverage | 100 x 3m (330 x 10 ft.) |
| Detection zones | 20 zones (5 quad layers) |
| Mounting height | 2.3m (7.6 ft.) |
| Power supply | 11 - 16V DC or 22 - 26V AC |
| Current consumption | 25mA(max.) at 12V DC or 60mA (max.) at 24V AC |
| Alarm period | Approx. 2 sec. |
| Alarm output | 2 relay output N.C. and N.O. 30V DC 1A (max.) |
| Tamper output | N.C. opens when cover, head removed 28V DC 0.1A |
| Warm-up period | Approx. 60 sec. (LEDs blinking during warm-up period) |
| Operating temperature | -40°C to +60°C |
| Weight | 1.8kg (63oz) |
| Environmental Protection | IP65 (wiring hole to be sealed) |
| Walktest | Visual: LED x 2 pcs OPM-WT optional walk tester, a buzzer sounds upon detection in detection area |
 |
 |
 |
 |
|
OPM-WT
(walk tester)
|
LRP SCA |
LRP MINI HOOD
for REDWALL 100QS
|
LRP CAGE |
Audible walk-tester. |
Bracket for mounting Redwall, Redwide and Redwatch detectors to 48mm scaffold poles. | Sun/Snow shields are available. | The LRP CAGE is designed to offer protection to Redwall detectors installed in areas where they may be subject to vandalism. The cage is suitable for use with all sensors in the range, except MegaRed. |
