Active infrared sensor PREMIER T
- PREMIER T(BL)
Safety
Color variations
-
Black
The OPTEX PREMIER T is designed to detect moving or stationary people in the swing path of the door. The OPTEX PREMIER T provides Premier Safety and Premier Style all of the time.
Features
- Universal Compatibility
The OPTEX PREMIER T can interface with just about any and all existing controls by analyzing both data output and motor voltage. One overhead presence sensor for all your new and service applications. - Easy Troubleshooting
Additional diagnostic LEDs have been added to enable quick and easy troubleshooting during initial installation or a service call. - Built-in Secondary Activation Module Function
No need to purchase a separate SAM module. The Secondary Activation function is built in. Added convenience and fewer parts. - 4-Pattern Memory
Four-pattern memory (two fully open and two fully closed) is provided to reduce or eliminate unwanted safety/relearn issues common to double swing doors caused by manual usage in knowing act environments (most commonly hospital corridors).
Detection Area
Specifications
Dimensions
Chart shows figures if all angles are set at 0degree.
mm (feet, inch)
| Mounting height A | 2000 (6'7'') | 2200 (7'3'') | 2500 (8'2'') |
|---|---|---|---|
| B | 364 (1'2'') | 400 (1'4'') | 455 (1'6'') |
| C | 182 (7'') | 200 (8'') | 227 (9'') |
| D | 23 (1') | 25 (1') | 28 (1') |
| E | 664 (2'2'') | 730 (2'5'') | 830 (2'9'') |
| F | 1391 (4'7'') | 1530 (5'1'') | 1739 (5'9'') |
| G | 682 (2'3'') | 750 (2'6'') | 852 (2'10'') |
| H | 1318 (4'4'') | 1450 (4'9'') | 1648 (5'5'') |
| I | 2045 (6'9'') | 2250 (7'5'') | 2557 (8'5'') |
| J | 2864 (9'5'') | 3150 (10'4'') | 3580 (11'9'') |
* The actual detection area may become smaller depending on the ambient light, the color / material of the object or the floor as well as the entry speed of the object.
| Model (System name) | PREMIER T |
|---|---|
| Power supply | 12 to 24VAC ±10% (50 / 60Hz) 12 to 30VDC |
| Power consumption | < 2.2W (< 4VA at AC) at 1 OA-613 T & 1 OC-913C T |
| Output (*1) | CMOS. Relay voltage / 5VDC |
| Test intput | Opto coupler Voltage 5 to 30VDC Current 6mA Max. (30VDC) |
| Output hold time | 0.5sec. fixed (Activate output) 0.5sec. to 10sec. (Safety output) |
| Response time | < 0.3sec. |
| Operating temperature | -20°C to +55°C (-4°F to 131°F) without dew condensation |
| Operating humidity | < 80% |
| Accessories | 1 Spec manual 1 Installation manual 2 Mounting screws 1 Mounting template for OA-613 T 1 Communication cable 1m (3'3'') 1 Wiring cable 0.6m (2') 1 Velcro tape 2 Wiring shells |
| Model (Sensor head) | OA-613 T |
|---|---|
| Cover color | Black |
| Mounting height | 2.0 m to 2.5 m (6'7'' to 8' 2'') |
| Detection area | See Detection area |
| Detection method | Active infrared reflection (*2) |
| Depth angle adjustment | 1st row area ±5° 2nd & 3rd row area ±5° |
| IP rate | IP44 |
| Weight | 230g (8.1oz) |
| Model (Controller) | OC-913C T |
|---|---|
| Weight | 65 g (2.365oz) |
*1 Two type of outputs (Activate , Safety)
*2 All rows have the presence detection.
mm (inch)
- The specifications herein are subject to change without prior notice due to improvements.
Contact phone number
- Headquarters
- +81-77-579-8700
Contact form
Support information